Skip to end of metadata
Go to start of metadata

Description

Version 2.9.1 SP2 for Ignition platform 7.9.4 to 7.9.x. Our modules currently are not compatible with Ignition 8.

The MES 2.0 platform release contains the new OEE 2.0 module. All other modules maintain the same functionality as their MES 1.0 counterparts, but have been modified to work on the new platform. The Web Services, Barcode Scanner, Instrument Interface and Production Simulator modules from the MES 1.0 suite can be installed alongside these MES 2.0 modules. All other modules need to be upgraded to the 2.0 version. If you are upgrading from any of the MES 2.0 versions, please restart your Gateway after install.

CURRENT OEE 1.0 USERS: (versions 1.9.4 and prior) DO NOT UPGRADE TO THIS VERSION 

Do not mix OEE 2.0 modules with the OEE 1.0 modules. Install OEE 2.0 only after uninstalling OEE 1.0 and removing any OEE 1.0 projects from the gateway.

Legacy Import functionality: This utility allows current users of the MES 1.0 suite to upgrade to the new 2.0 platform. The process for this migration is somewhat complex, and involves replacing components, transferring data, and more. As such, we have prepared detailed documentation with regards to accomplishing this migration. Please read the background information carefully, and follow the steps carefully. Completing the steps incorrectly, or failing to make adequate backups can cause this migration to fail. The documentation for Legacy Import is available at Migrating from OEE 1.0 to OEE 2.0.

Click on the link to download this release:

Info

The Trace, OEE, Recipe and SPC modules require the installation of Production module. All the modules must be in the same version!

ModuleDescription
Production-module.modl Required by OEE, T&T, SPC and Recipe Modules
OEE_Downtime_V2-module.modlCore module
Trace-module.modlCore module
SPC-module.modlCore module
Recipe-module.modlCore module
Web-Service-module.modlLatest version is 2.9.4 and can be used with 2.9.1 core modules as this is a utility module.

 

Change Notes

General - All MES Products

 Click here to see the change notes...
Change_TypeChange Logrev
FixedIssue where the MES Schedule View threw an error when scheduling an operation with Rate Period = CycleSP2
FixedWork order rows could not be edited or deleted in the MES Work Order Table component after changing the Header name using the Table CustomizerSP2
FixedSchedule entries were overlapped even though the 'Overlapping Enabled' property was set to false in the MES schedule View componentSP2
FixedEnterprise Production Item events scripts were not saved after importing a Production ModelSP2
FixedInclude Children analysis setting didn't return children in the analysis results. This also caused the OEE Time Chart component to not work correctly when line names are similar (i.e. Line 1, Line 11, etc.)SP2
FixedIssue where the end date time of response segments was being set to the scheduled end date time instead of the actual time. This caused tag collector values to be recorded with the incorrect timestamp and appearing out of order.SP2
Fixed"MES Object not found for UUID...." was generated when attempting to begin the associated operation responseSP2
FixedChanged the type of the return value for the system.mes.getTagCollectorLastTimeStamp script function to be DateSP2
FixedRestarting MES modules while active operations were in progress caused a flood of errors in the gateway logsSP2
FixedDuration of a schedule entry that was dragged and dropped onto another existing schedule entry was calculated incorrectlySP2
FixedUpdated database index definitions for mescountvalue and mesfactorvalue did not take effect if an older version of the index was presentSP2
FixedChanged the default data pattern used in the analysis engine to yyyy-MM-dd HH:mm:ss to prevent a mismatch of what the MES Analysis filter editor usesSP2
FixedMES Legacy Import process set the downtime detection method incorrectly for cell groups and caused the migration to failSP2
AddedThe getProductionSettingsProperty(equipmentPath) script function the the ProcessSegment, OperationsSegment, RequestSegment and ResponseSegment MES objectsSP2
FixedPermission settings in Analysis Selector/Controller did not work as expected.SP1
FixedMES Segment Selector component didn't work with <any equipment> or <any material> class.SP1
FixedTypo in error message for the responseSegment.setMaterial() function.SP1
FixedDouble execution of delayed schedule check.SP1
FixedMESDependencyRequestProperty's getRequestRef() method was spelled incorrectly (as getRquestRef()). SP1
FixedAnalysis had problems with class cast exceptions when using an Oracle database.SP1
FixedWork orders did not display in the work order table when using an Oracle database.SP1
Fixed____BLANK____ values appeared in analysis data and filter options when using an Oracle database.SP1
FixedAnalysis would throw errors for rate period and work order values when using an Oracle database. SP1
FixedCertain shift configurations that crossed midnight did not behave properly.SP1
FixedChanging a downtime reason or splitting a downtime event threw an error when using an Oracle database.SP1
Fixed'Actual Quantity' value in the Work Order Table would not update when using an Oracle or Postgres database.SP1
FixedGrammatical error in getCurrentOperations() intellisense help.SP1
FixedMESOperationsResponse.getActiveSegmentNames() would return a misleading error when there were no segments active.SP1
Fixed'Equipment Path Filter' doesn't work on the MES Schedule View component.SP1
FixedPaths were not formatted properly with PostgreSQL databases.SP1
FixedMaterial property did not enforce a rate setting when the rate period was set to "Cycle".SP1
FixedAdded queue to better handle fast-changing equipment state or other changes that trigger repetitive live analysis updates.SP1
FixedgetAvailableReferenceOptions method didn't work for ResponseMaterialDef.SP1

Fixed

Missing and incorrect documentation on core scripting functions

RC4

Fixed

Newly added Additional Factors did not appear in the MESFactorDef table until after a production module restart

RC4

Fixed

Exceptions occurring when using Ignition schedules to determine the shift. This also caused live analysis for the shift to stop updating correctly

RC4

Fixed

License changes did not take effect until after a Production Module restart

RC3

Fixed

Exception when new Material Lot object is created preventing OEE runs and Track and Trace segments from operating correctly

RC3

Fixed

Analysis data was missing when more than 1000 rows of data existed for the given date range

RC3
Fixed'Enabled' column value of the 'mescountdef' table is set to 0 when the MES Counter entry is deletedRC2
FixedCorrected typo in Exception message when a specified materials setup to save to a particular location, but the location is configured to hold a single lot and it already has an available lotRC2
FixedIssue where the additional materials added to a segment with counter names specified, used the Material Out counter instead of the named counterRC2
FixedCorrected auto documentation for MES script functionsRC2
FixedTypo in Material reference Quantity property's descriptionRC2
FixedErrors that occurred when additional materials are added to an Operations Segment that is scheduled and then started using the MES Schedule Selector componentRC2
FixedMachine Licenses not including the cell groups and cells of a lineRC2
FixedCorrected production item license indication in the designerRC2
FixedIssue launching client or designer on Java 1.6RC2
FixedDocumentation was not displaying for system.mes.workorder scripting functionsRC2
FixedMES Counters not handling count values correctly when the Production Module is updated, restarted or Ignition is restartedRC2
AddedAdds hasMESOperationsRequestLink() boolean function to the MESScheduleEntry object for use in scripting to match other hasX() functions availableRC2
ImprovedMES Work Order Table now has the option to enable and disable the Add & Edit ButtonsRC2
ImprovedAdded work order UUID and name to the MES Schedule Selector componentRC2

OEE Module

 Click here to see the change notes...
Change_TypeChange Logrev
FixedWasn't possible to modify rolled up events all at once for a line set to Initial Reason downtime detection modeSP2
FixedLink not found error when rescheduling a request that is based on an Operations Definition set to <any equipment>SP2
FixedCustom property's changed value of a Process Segment is not updated to its Operations SegmentSP2
FixedSplitting downtime events did not always refresh the data in the OEE Down Time TableSP2
FixedOpening the Slide panel of the OEE Down Time Table component works incorrectly when any object that updates exist in a windowSP2
FixedTotal in counts are incorrect when the segment material count source is an MES Counter and lots are changed during the segment run durationSP2
FixedMES Schedule View component applies the same production rate to all Operations in a Route, even though they have different production ratesSP2
FixedNot possible to revert the downtime reason for line level downtime eventsSP2
FixedIssue in OEE Material Manager component where line selection was not always retainedSP2
FixedActual Counts column in the Work Order Table component not reflecting OEE production runsSP2
FixedOEE Down Time Table allowed saving a downtime event without selecting an equipment state and then subsequently threw an errorSP2
FixedOEE Down Time Table would allow the user to enter the split view even when the event was too short to splitSP2
FixedOEE Down Time Table threw an error when changing the equipment from a cell to the parent lineSP2
FixedSplit downtime events did not keep the override and revert behavior of the event they were split fromSP2
Fixed Changing the downtime reason for split events could change the downtime reason for other splits following the changed eventSP2
Fixed Short Stop Time is not being totaled correctlySP2
ImprovedAdded the scripting function, verifyProductionSettings() to set default Production-Settings properties for a Line item and its descendant equipment itemsSP2
ImprovedAdded Line Downtime Event Sequence analysis calculator to the filtersSP2
AddedAdded the Outfeed Standard Count to the Analysis Data PointsSP2
FixedFixed a bug that cannot handle multiple {Equipment Path} parameters.SP1
FixedState and mode codes were not sorted properly in the Equipment Manager.SP1
FixedPrevented reject counts from being negative when infeed - outfeed count method is used. SP1
FixedException when scheduling operations from a script for operations that were created using the OEE Material Manager.SP1
FixedIssue where licensed machines would not appear in the drop down boxes of the OEE Downtime 2.0 tab of the Main Production Item in the production model.SP1
ImprovedModified Key Reason Downtime to handle Starved For Unknown Reason and Blocked for Unknown Reason when root cause cell is running before the neighbor cell is starved or blocked.SP1
FixedMES Analysis Controller showed as Bad Data Quality when added to a window.full
FixedOverall OEE was not being capped when the OEE Availability, OEE Performance or OEE Quality were capped. full
FixedIssue in MES Value Editor component where the Insert Before and Insert After didn't work correctly.full
FixedException in the OEE Time Chart component when the duration was null or blank.full
ImprovedOptimized analysis caches for better speed.full
FixedLine Schedule Available and Line Schedule Available Time analysis calculators cause high CPU usage.full
FixedDowntime notes showing incorrectly for multiple downtime events in downtime table and analysis.full
FixedIncorrect downtime duration when the line downtime reason does not change through a production run change.full
FixedReporting MES Datasource was not using the correct parameter values at the time the report was generated.full
FixedCorrected the height of the Work Order and the Operation combo-box on the General tab in the Entry Edit view in the MES Schedule View component.full
FixedParameters were not showing in the 'Filter By' view of the MES Analysis Selector in the Ignition client.full
FixedException when executing analysis when no line values have been recorded.full
FixedAdding of security role(s) in the MES Analysis Selector component when new roles are added to Ignition.full
FixedException being thrown by Line Standard Count analysis calculator if a line path filter was not provided.full
FixedIssue when using Ignition schedule to determine the shift for equipment, sometimes the shift start date is not updated to the correct date.full
FixedLive Analysis tags are all String data type instead of the true data type.full
FixedCorrected data type of From Time Stamp tag in live analysis.full
FixedMemory leak in the OEE Time Chart component.full
FixedFixed a bug that when a different equipment item for a downtime event is selected in the OEE Downtime Table, downtime reasons for the newly selected equipment item are not correct.full
FixedProduct indexing not working correctly when a work order had not been previously recorded by the tag collector for the line.full
FixedSome nodes in the Material Manager required two clicks to expand instead of one.full
FixedExport/import did not handle null reference UUID properties properly.full
FixedWork Order Table Edit, Delete, and Copy buttons remained disabled until a row was right clicked.full
FixedChanged analysis notification message say "group by" instead of "compare by".full
ImprovedMES Counter's name is set by the tag's name  when using drag-and-drop.full
FixedIssue when an analysis filter for an Equipment Path is blank, it caused incorrect data and in some cases high CPU usage.full
AddedLine Schedule Count and Line Schedule Duration tag collectors and analysis calculators.full
AddedRun lookback count property to OEE Downtime Table component.full
ImprovedConsole messages for issues determining live analysis period begin date.full
FixedIssue where MES Analysis Selector and MES Analysis Controller components providing data that is not being displayed properly with Ignition Chart or Table (not Power Table) components.full
ImprovedFor the MES Schedule View component, renamed "Parent Equipment Name Filter" property to "Equipment Path Filter" and added functionality to support wildcard characters in path.full
AddedAdded descriptions to the import page to explain the import conflict options.full
ImprovedExport / Import scripting functionality now better handles moving configuration across systems. Includes new front end component for interfacing with back end scripting functions.full
Improved

Don't show the message "Save project to make production changes active." when exporting. This rule is applied to all export cases: Enterprise - General: MES Events, Line - General: MES Counter, Line - OEE Downtime 2.0: Live Analysis, Cell - General: Additional Factors, MES Counter, Cell - OEE Downtime 2.0: Live Analysis, Cell Group - General: Additional Factors, MES Counter, Cell Group - OEE Downtime 2.0: Live Analysis, Location - General: Additional Factors, Storage Unit - General: MES Counter

full
FixedFixed issue in the MES counter editor popup window where the components are larger than the windows hiding the down arrow of the drop down boxes.full
ImprovedAdded equipment name and equipment subpath columns to OEE Downtime Table component. Also, added Excluded Equipment Path property to control what portion of the equipment path is shown in the equipment subpath column.full
ImprovedChanged OEE Downtime component to be more touch screen friendly.full
AddedAdded new Enable Mode Editing, Enable State Editing and Enable Schedule Editing properties to the OEE Equipment Manager component.full
ImprovedHandling of negative OEE values.full
AddedAbility to add custom properties to the MES Analysis Selector and MES Analysis Controller components. The custom properties then can be used in analysis filter expressions.full
AddedAdded new Downtime Reason Button Width and Downtime Reason Button Height properties to the Downtime Table component.full
AddedThe button 'Change Equipment' to the Downtime Reason List view in the Downtime Table component.full
AddedTime Interval and schedule forecasting analysis value calculators. This allows for projecting OEE standard count, target count versus actual counts into the future.full
AddedAuto-documentation for MES tag collector script functions.full
FixedChanged "Order By" to "Group By" in analysis error messages.full
FixedAdded Minimum Cells Running Threshold setting to Line production item which was missing.full
ImprovedRenames Standard Count analysis data point to Infeed Standard Count.full
FixedScripting documentation for system.mes.oee.beginOEERun now correctly specifies workOrderName rather than workOrder.full
FixedIssue where restarting the production module with active runs in progress could lead to stale threads and error messages in the gateway logs.full

Fixed

Issue where OEE Outfeed Count analysis calculator was scaling by package count when it should not be

RC4

Fixed

Issue where OEE Downtime Table component didn't clear out when changeover was started for a new production run

RC4

Fixed

Issue where Infeed Standard Count value was not being calculated correctly

RC4

Fixed

Support system.mes.addTagCollectorValue() for the Equipment Additional Factor and the Equipment Count collectors

RC4

Fixed

Exception in MES Analysis being used in Ignition reporting after the release of Ignition 7.9.4. From this point forward, Ignition 7.9.4 or later is required for the MES 2.0 modules

RC4

Fixed

When the OEE Reject Count analysis calculator is being used at the cell or cell group levels, the package count is being accounted for in the reject count

RC4

Fixed

Issue where it was not possible to change the downtime reason for downtime events that originated at the cell level

RC4
FixedIssue where component popup menus did not appear on LinuxRC4
FixedEnable the "Insert Before" feature when a table is empty in the MES Value Editor componentRC4
FixedEnable to edit a timestamp when a user edits a value in the MES Value Editor componentRC4
FixedAdded the extension function 'configureHeaderStyle', and the 'Header Background Color' and the 'Table Background Color' properties to the MES Value Editor componentRC4
FixedAdded the 'Header Background Color' and the 'Table Background Color' properties to the OEE Down Time Table componentRC4
FixedAdded the extension function 'configureHeaderStyle', and the 'Header Background Color' and the 'Table Background Color' properties to the Analysis Table componentRC4
ImprovedAdded back end support for changing the equipment with the downtime reasonRC4
ImprovedOptimized loading speed of equipment state/mode items in the Equipment Manager componentRC4
FixedOEE legacy import functionalityRC4
AddedIn the Run Director component , added the following propertyChange events: itemSelect, changeoverBegin, changeoverEnd, productionBegin, productionEnd, changeoverAbort, productionAbortRC4

Fixed

Analysis controller not showing identical results to the analysis selector when controller "Analysis Settings Source" is set to component mode with exact same settings as an analysis selector

RC3

Fixed

Fixed a bug that the Actual Quantity value in the Work Order Table, the Percent Complete value in the MES Schedule Selector and the progress value of the Schedule Entity in the MES Schedule View are not updated when changing a tag value for an out-feed count

 RC3

Fixed

Issue where the drill down context menu in the Analysis Table displayed in the incorrect location with scrolled table data

 RC3

Fixed

changed the way to zoom back out in the OEE Time Chart. - Zoom in: mouse-left-clicking and dragging from left to right. - Zoom back out (reset): mouse-left-clicking and dragging from right to left

 RC3

Fixed

Fixed a bug that does not throw an exception when the system.mes.addTagCollectorValue() script function is called twice with the same timestamp

 RC3

Fixed

Fixed a bug that deleted MES Counters continue to increment and function until a Production Module restart

 RC3

Fixed

Issue where you could not save a newly copied and pasted equipment mode class to an equipment item (with an error message stating that it was missing production, changeover, and idle modes even though they were present)

 RC3

Fixed

Issue where a copied and pasted mode or state class could lose its child states/modes and instead show a "Dummy Node" when expanded

 RC3

Fixed

Issue where copying and pasting a mode or state class would create multiple unnecessary copies of complex properties in the database such as the EquipmentModeClassSecurity property

 RC3

Fixed

Issue where equipment modes allowed "Paste" operation but should not have

 RC3

Fixed

Issue where core MES doesn't start when only OEE is installed without another MES module

RC3

Fixed

Issue where MES Object Selector "include" properties had incorrect tool tips

RC3

Fixed

Issue where the setSelectedMESObjectTypes scripting function on the MES Object Selector component did not work properly

RC3

Fixed

Issue where Analysis Table data drill down was incorrect when working with sorted table data

RC3

Fixed

An issue where the OEE Material Material allowed copying and pasting material definitions within other material definitions

RC3

Fixed

Issue where Analysis Selector and Analysis Controller components threw exceptions when the reporting module was not installed

RC3

Fixed

The MES Schedule View component where incorrect AM/PM indication was being shown for the end time in restriction tooltips

RC3

Fixed

Changed gateway scoped OEE scripting method names from system.mes.oee.beginRun, system.mes.oee.getActiveSegment, and system.mes.oee.getAllActiveSegments to system.mes.oee.beginOEERun, system.mes.oee.getOEEActiveSegment, and system.mes.oee.getOEEAllActiveSegments to match documentation and usage in project scoped scripting since those are the names reflected in the documentation.

RC3

Fixed

Issue where items show that they are unlicensed for OEE 2.0 when the SPC license is not set or not set to platform 2.0 license format

RC3

Fixed

Issue where a NullPointerException would be thrown when scheduling operations with the scripting function system.mes.scheduleOperations with scheduling category 'Actual'

RC3

Fixed

Issue where the Downtime Table's "data" property did not update when the underlying data changed

RC3

Fixed

Exception in Short Stop Time analysis calculator and modified to work with Planned Downtime

RC3

Fixed

Issue where adding or editing a note in the OEE Down Time Table did not refresh the table with the updated note value

RC3

Fixed

Exception that happened occasionally when saving material in the OEE Material Manager component

RC3

Fixed

Fixed a bug about the extension function 'configureHeaderStyle' for OEE Down Time Table

RC3

Fixed

Fixed the MES module load order Issue

RC3

Fixed

Issue where the OEE Run Director did not work for lines that included hyphens in the equipment path

RC3

Fixed

Issue in the OEE Equipment Manager mode / state list views where the root node was selected upon entering the views instead of the class selected for the equipment

RC3

Fixed

Issue where the MES Work Order Table component did not display all open work orders and did not allow for selecting non-OEE materials in the material tree when adding or editing a work order

RC3

Fixed

Issue where cell groups with Downtime Detection Mode of Parallel Cells and Minimum Cells Running Threshold of 0 caused ArrayIndexOutOfBoundsException to be thrown in analysis

RC3

Fixed

Fixed a bug that creating a Material Definition, selecting a Line item, and then pressing the "back" button has unexpected consequences in the OEE Material Manager component

RC3

Fixed

Issue where the system.mes.workorder.getMESWorkOrder scripting function returned the work order without getting the up-to-date quantities and the MESWorkOrder.updateQuantities function did not actually update the calling object

RC3

Fixed

Issue in MES Schedule View component where old unplanned downtime icon path property was being displayed and should not have been

RC3

Fixed

Changed to prevent Tag Collector from being started if the equipment item is disabled

RC3

Fixed

Issue where grouped reject counts in analysis would start from 1 instead of 0

RC3
Improved

MES Object Selector now supports MES Analysis Settings objects that can for example be used in combination with the MES Analysis Controller to bind a controller to a drop down selection of analysis settings

RC3
Improved

In the MES Analysis Selector component, show an arrow button on the 'Name' column cell of the 'Setting' table in the 'General' panel when a user clicks the plus button ('Add New Setting') of the 'Setting' table

RC3
Improved

Performance in the Equipment Manager when adding or editing modes or states with thousands of modes or states present

RC3

Fixed

Typo "segement" fixed to "segment" in intellisense documentation for some scripting functions

RC3

Fixed

Issue where the equipment manager would allow importing mode data into the state view and vice versa without an error message

RC3

Improved

Added units to "Short Stop Threshold" field in the Equipment Manager's Edit Equipment State view

RC3

Fixed

Missing database indexes for analysis counters and additional factors

RC3
Improved

The MES Analysis can handle equipment path parameters with the '[global]\' in it

RC3

Added

The 'Header Background Color' and the 'Table Background Color' properties to the MES Work Order Table component

RC3

Improved

Added refresh() scripting function to MES Schedule View component for forcing update

RC3

Improved

Locked the top area of the ScheduleEntryEditorPanel of the MES Schedule View component

RC3
Improved

 Added the extension function 'configureHeaderStyle' for MES Work Order Table

RC3
Improved

 Added gateway scripts for registering custom data-connections, value-sources, or value-calculators :

- createCustomDataConnection() - createCustomValueSource() - createCustomValueCalculator() - createRawSourceValue() - getValueModeType() - registerCustomDataConnection() - registerCustomValueSource() - registerCustomValueCalculator()

RC3
Added

Added the "Show Date Range Header" property to the OEE Time Chart

RC3
Fixed

Fixed problem when importing where temporary directories were not removed

RC3
Improved

 Legacy Import page now displays the same consistent view across multiple instances of the page. This includes accurately displaying the current import activity when navigating away from the page and then returning

RC3
FixedFixed a bug that when a different equipment item for a downtime event is selected in the OEE Downtime Table, downtime reasons for the newly selected equipment item are not correctRC2
FixedIssue where "From Time Stamp" and "To Time Stamp" data points were available for Group By selection in AnalysisRC2
FixedOverriding and reverting line downtime event reasons. Also, added Line State Overridden analysis calculatorRC2
FixedIssue where Equipment State Path only displayed CLASS/STATE, skipping intermediate parent statesRC2
FixedIssues where working with sub-state hierarchies in the Equipment Manager produced inconsistent results within the associated MES ObjectsRC2
FixedIssue where multiple parents could be added to EquipmentStates, EquipmentStateClasses, EquipmentModes, and EquipmentModeClasses via scriptingRC2
FixedIssue where tag write errors occur when writing to tags associated to MES tag collectorsRC2
FixedPotential issue of a deadlock in MES Live AnalysisRC2
FixedLicensing issue with the Run Director ComponentRC2
FixedIssue where adding an equipment state, state class, mode, or mode class to an unexpanded node in the Equipment Manager would double add the node or display a "Dummy Node" instead of the child nodesRC2
FixedMinor issues with inconsistent refreshing of the Equipment Manager tree for states and modesRC2
FixedIssue where MTBF analysis calculation was not correct depending on the downtime event sequence and the time was not being capped to the analysis begin dateRC2
FixedIssue where the Downtime Table tree view encountered an error and displayed a default data set instead of the downtime states for the equipmentRC2
FixedIssue where property changes on the Down Time Table could cause the component to automatically close the edit viewRC2
FixedIssue where non-applicable actions would be available in the equipment state and mode tree views even though nothing was selected in the treeRC2
FixedAdded Minimum Cells Running Threshold setting to Line production item which was missingRC2
ImprovedAdded Group setting to MES counters that allow for organizing counters in analysis data point selection windowsRC2
ImprovedChanged to allow Blocked and Starved for Unknown Reason downtime events to be overriddenRC2
ImprovedIf a production run is not active, changed "Start of Run" mode of Live Analysis to show last production run valuesRC2
ImprovedAdded cell that caused line downtime to the tooltip of the OEE Time Chart componentRC2
ImprovedRemoved mode and state color properties and added the 'getModeColor' and the 'getStateColor' extension functions to get colors. Added an 'unknown ' icon for an unknown stateRC2
ImprovedOptimized loading speed of downtime reason items with the 'Tree' view mode in the OEE Downtime table componentRC2
Improved

Equipment Manager performance when expanding state classes or states with many children

RC2

Track & Trace Module

 Click here to see the change notes...
Change_TypeChange Logrev
FixedActive lot was not able to be consumed by another segmentSP2
FixedError when optional input material is not set when begin is called on the segment but is set afterward and update is calledSP2
FixedResponse segment setMaterial() function fails with incorrect state when run multiple time in scriptSP2
FixedIssue where an error was thrown when beginning a segment using an Oracle databaseSP2
FixedMaterial lot quantity is always set to 0 when updated to a new material if it is an OUT Material and set to OPTIONALSP2
FixedIssue where similar but unrelated material names caused exceptions when attempting to begin segmentSP2
ImprovedIn the MES Schedule View component, the 'Split Schedule' context menu will be disabled if the schedule entry cannot  be splitSP2
ImprovedSet the quantity to 0 when a lot is not specified for a segment material reference that is set to optional and Available Lot QuantitySP2
FixedIssue where searching for MES objects using a custom property value filter expression did not work when multiple properties were specified.SP1
FixedFixed a bug that a selected material is unselected on the 'Material' combo-box in the MES Material Selector component when beginning a Operation Segment.SP1
ImprovedAdded tooltips for showing equipment paths to the Equipment Selector/Edit Reference's list in the MES Object Editor component.SP1

Fixed

Added ability for the Material Lot Status Filter property of a segment material reference to include multiple lot status values separated by commas

RC3

Fixed

Issue where an incorrect error message was displayed when setting the "Show Categories" or "Edit Category" properties of the MES Schedule View component to blank

RC3

Fixed

Calling the segement.begin(date) method generates NPE in gateway log

RC3

Fixed

Issue scheduling multiple operations in a route for specified begin and end times returned an error

RC3

Fixed

Exception when an Operations Response is created and save without scheduling it first

RC3
FixedIssue where the trace graph did not appear properly when using an Oracle databaseRC2

SPC Module

 Click here to see the change notes...
Change_TypeChange Logrev
FixedMissing and incorrect documentation on SPC scripting functionsRC4

Fixed

If a sample is scheduled, cannot see any additional factors for the filter by in SPC Selector

RC3

Fixed

SPC queries sharing execute object

RC3
FixedIssue where system.quality.spc.* scripting functions were not available in the client scopeRC2
FixedIssue where SPC functions setSampleNote(), setSampleCause(), and getCauseList() did not work from the client or designer scopeRC2

Recipe Management Module

 Click here to see the change notes...
Change_TypeChange Logrev
ImprovedAdded scrollbars on Add Recipe panel, Edit Recipe panel, Select Production Items Panel, Values Export panel, Security Settings panel, Note panel, and String Editor panel in the Recipe Editor component.SP1
FixedRecipe Value with a DateTime tag does not allow the recipe to display.full
FixedMissing and incorrect documentation on recipe scripting functionsRC4
FixedIssue where the Recipe Selector List would throw stack traces in console log upon component startupRC2
FixedIssue where the Recipe Editor's Production Item listing would show misplaced tool tips and occasionally throw an ArrayIndexOutOfBoundsExceptionRC2
FixedFixed issue where popup menu to change security, revert value and read value not showing in Recipe Editor componentRC2

Web Services Module

 Click here to see the change notes...
Change_TypeChange Logrev
ImprovedSupport SSL authentication for Consumers2.9.4
  • No labels